Service manual
PRESTO OWNER’S MANUAL Page 4 WP & WPS Series Work Positioners
S E C T I O N 1
INTRODUCTION
This manual attempts to provide all of the infor-
mation necessary for the safe and proper installa-
tion, operation and maintenance of Presto’s Bat-
tery Operated Work Positioner. It is important
that all personnel involved with the installation,
maintenance or operation of the Work Positioner
read this manual. Additional manuals are avail-
able at www.prestolifts.com
The battery-operated Work Positioner is equipped
with a data plate that has a serial number and
model identication. Please refer to these num-
bers when ordering parts or requesting further
information.
The battery-operated Work Positioner is designed
for lifting, lowering and positioning a wide vari-
ety of loads. Call Presto for further instructions
where unique situations arise that are not covered
in this manual.
The battery-operated Work Positioner is designed
for only indoor, non-hazardous locations. These
units are not for personnel lifting. All equipment
is manually propelled and has a hydraulically
powered vertical travel.