Operation Manual

8
USER MANUAL RoadRunner PCDVRR710X
5. Video record and photo
capture
With your DVR, you can record high-quality videos and capture photos in burst,
which can be the evidence when the accident happens.
Please confirm that there is a Micro SD card connected before video recording.
Record videos
1. Slide the switcher to [ ] to power on your DVR. You will hear a buzzer beep for 5 times and
the laser indicator light on at the same time.
2. Press [R] to choose the recording resolution.
- When the Resolution indicator is red, the resolution is 1280x720p 60fps.
- When the Resolution indicator is yellow, the resolution is 1280x720p 30fps.
- When the Resolution indicator is green, the resolution is 1920x1080p 30fps.
3. Press [M] to change the recording mode.
- When the Mode indicator is red, it is flip recording mode.
- When the Mode indicator is green, it is standard recording mode.
4. Slide the switcher to [REC] to start video recording.
5. To stop video recording, slide the switcher to the centre.
Take photos
1. Slide the switcher to [ ] to power on your DVR. You will hear a buzzer beep for 5 times and
the laser indicator light on at the same time.
2. Aim your camera lens to the subject.
3. Slide the switcher to [ ] and release it to capture photos in burst. There is a buzzer beep if
the photo captured successfully.
5