Car Video Recorder RoadRunner 560 / RoadRunner 560GPS User Manual Version 1.0 www.prestigio.
About this user manual This user manual is specially designed to detail the device’s functions and features. -- Please read this manual before using the device to ensure safe and proper use. -- Descriptions are based on the device’s default settings. -- Prestigio continuously strives to improve its products. Due to software upgrading, some contents in this user manual may be different from your product.
Contents 1. Unboxing ������������������������������������������������������������������������������������������������������������������������� 1 Inside your package ����������������������������������������������������������������������������������������������������������������1 Device overview ����������������������������������������������������������������������������������������������������������������������1 2.
1.
2. Getting started Insert a microSD card Before starting video recording, please insert a microSD card (not included) into the slot until it locks in place. 2 The device will automatically recognize it as default storage and all the data will be saved on this card. Install the suction mount 1. Match the mounting slots of the device and the suction mount, and press the suction mount until it locks in place. 2.
Main screen Press power button to turn on device, you will enter preview mode, and get below screen: 1 2 3 4 5 6 7 Resolution Recording icon Recording time Infrared light Battery Motion detect GPS 8 9 10 11 12 13 Loop recording Microphone Memory card Speed and GPS location Plate number and LOGO stamp Date and time When the device is connected to the GPS signal, the icon User Manual will be green.
3. Settings Before recording, you can set up the device according to your requirements. -- In preview mode, press [ ] to enter settings, press it again to exit. Use [ ]/[ ] to navigate the menu. 3 Settings menu • Resolution: Select the resolution of recorded video: 1920x1080(30 fps) HDR , 1920x1080(30 fps), 1280x720(60 fps), 1280x720(30 fps). • Video quality: Set the video quality to super fine, fine, or normal. • Record overwrite: Set the video duration ( 1, 3, 5, or 10 minutes) for loop recording.
4. Recording 4 Record a video Auto video recording Connect the device to car charger, when the car engine launches, the device will automatically turn on and start loop video recording. When shut off the car engine, the device will save the last file and turn off. You can cancel it by turning off POWER ON RECORD in settings. Manual video recording In preview mode, press [REC ] button to start and stop video recording.
6. Playback Play video on DVR 1. 2. 3. 4. In playback mode, press [REC ] and [ ]/[ ] to select your desired video. Press [REC ] to open the file, and press it again to start playing. Press [ ]/[ ] to slow down or speed up playing. Press [Mode] to exit playback mode. 6 Trim a video 1. Press [REC ] to open the file, press and hold it to enter video trimming mode. 2. During playing, press [ ] to start or stop video trimming. 3.
7. Specifications 7 Display Processor Image sensor View angle 3", 960 x 240 pixels Amarella A7LA30 4.0 MP CMOS 1/2.5" 170° 1920x1080 (30 fps) HDR , 1920x1080 (30 fps), 1280x720 (60 fps), Video resolution 1280x720 (30 fps) Video codec MP4 (H.264) Picture format JPEG Memory up to 64GB (microSD Class 6 or above, SDHC/SDXC) Microphone Built-in Motion Detection Yes Power source Built-in battery, car charger Interfaces AV out, HDMI, mini USB Operating temperature 0 °C ~ 45°C Dimension 52.8 x 96.2 x 26.
