Quick Start Guide

EN–2 Roadrunner 530A5GPS

Quick Start Guide

Prestigio Roadrunner 530A5GPS

Note：

Beside USB port, the device can be supplied with power from another USB

port on the suction mount.

Getting started

3. Power on/Power off

 Position the device in the vehicle using the suction mount and press

the Power button to turn it on. To power off the device press the

button again.

 You can also connect the device to the car charger. It will

automatically turn on and start recording when the car engine starts.

When the engine stops, the device will automatically save the last file

and turn off.

4. Charging

 Using the car changer: Connect the device to the car charger. The

device will start charging after the car engine is turned on. The device

will automatically turn on and start recording. When the engine stops,

the device will automatically save the last file and turn off.

 Normally it takes approximately 2-3 hours to fully charge the device.

Note:

Before using the device for the first time, please, connect it to the PC

or notebook using the USB cable provided to fully charge the Li-ion

battery. The battery is completely charged in 2-3hours.

5. Inserting the Micro SD-card

 Before starting video recording, please, insert a Micro SD card (not

included) into the Micro SD card slot in the device.

 To extract the Micro SD card slightly push it inside the device, and

remove.

Note:

After inserting the Micro SD card the device will automatically

recognize it as default storage and all the data will be saved on this

card.