Operation Manual

4
Installing Memory Card
The device supports micro SD/SDHC cards.
To insert a Micro SD card, place the card connector towards the front side of the
device and the printing side of the card towards the rear side of the device.
To remove the micro SD card, gently press the edge of the card to release the
safety lock and pull the card out of the slot.
Transferring Files
Before reading or playing files, you may need to transfer media files from a computer
to the device.
(1) Connect the device to a computer with the supplied USB cable. Two removable
disks will be added to the computer, respectively referring to the internal flash
memory and the SD card.
(2) Once the connection is done, turn on the USB storage.
(3) Open a removable disk, then copy files from the PC to it.
Note:
Since pre-installed applications and Android OS occupy a considerable part of capacity about 2.0GB, it is
normal that you see huge difference between available memory space and total capacity.
Power On/Off
To turn on the device, press and hold the Power button on the unit until you see the
boot-up screen then release.
To turn off the device, press and hold the Power button until you see the option
“Power Off”, tap on “Power Off” and then tap on “OK”.
Tip: For the sake of power saving, this device may sleep with the screen display locked
when there is no touch action for a while (depending on the actual setting of Display-Sleep).
You can briefly press the Power button to wake it up.
Unlocking the Screen
The screen will be locked after the device is idle for a few seconds.
You need to unlock the screen by dragging the lock icon
rightwards before you continue to use the device.
Prestigio Wizard
When using the device for the first time (or after resetting all users’ personalized
settings) the device will automatically launch the Startup Wizard.
The Startup wizard interface will offer to choose the system language from the
language list and the Time Zone, etc.