Operation Manual

USER MANUAL MultiReader PER3764BC

3. Basics

Charge the battery

A new battery is partially charged. The battery icon in the lower-left corner

shows the battery level of charging status.

1. Plug the small end of the charger into the micro USB port of the device, and

plug the large end into the PC.

2. After fully charging, disconnect the device from the PC. First unplug the USB cable from the

device, and then unplug it from the PC.

• You can use the eReader while it is charging.

• Keeping the charger plugged to the eReader when the battery is fully charged will not

damage the battery. The only way to turn off the charger is to unplug it, so it is advisable

to use an easily accessible power socket.

Connect to your PC

You may need to connect your eReader to computer in order to complete activation. Your

eReader’s micro USB port lets you exchange media and other files with a connected computer.

- Connect your eReader to the PC using the supplied USB cable.

Load files from your PC

1. Connect your eReader to the PC by using the USB cable.

2. Transfer the files from your PC to the eReader.