User's Manual

25
USER MANUAL MultiPhone PAP5430
2. On the screen, tap .
3. Tap to capture the photo.
Take a panoramic photo
You can capture anything wide or tall in a single photo by using your phone.
1. Tap to turn on the camera.
2. Tap , and then tap .
3. When you’re ready to take the first shot, tap . Capturing panorama screen appears,
prompting you to pan left or right in landscape view (or pan up or down in portrait view).
4. Pan your phone as smoothly as you can, and then pause when you see a complete frame on the
screen. The camera automatically captures the shot.
5. Repeat the previous step to take the remaining shots.
6. The camera stitches the shots into a single photo.
Zoom and flash are disabled when you're in this mode.
Take continuous shots
With your phone, you can take continous shots by just holding the once.
Make sure that you're in picture capture mode .
1. Tap to turn on the camera.
2. Tap to customize your camera.
3. On the pop up window, tap > Burst.
4. When you’re ready to take the photo, tap and hold .
Record a video
1. Tap to turn on the camera, and then tap .
2. When you’re ready to start recording, tap .
3. While recording, you can freely scroll the ball to zoom in or out.
4. To stop recording, tap .
Camera scenes
A scene is a collection of settings to suit the lighting and environment. Use Normal and let the
camera automatically determine optimal settings, or choose from a wide selection of scenes
before you start taking photos. Predefined settings make point-and-shoot photos easier to take.
1. Tap to turn on the camera.
2. Tap .
3. Tap > SCN.
Camera and video settings
Before taking photos/recording videos, customise your camera settings.
1. Tap to turn on the camera.
2. Tap or .
3. Tap to customize your camera and video settings. The available options vary depending on
the mode used.