User's Manual

USER MANUAL | MultiPhonePAP4040 DUO
10
To insert a card, remove the back cover from the phone, place the cardin the card slot and move
towards to lock (see the respective signs on the memory card tray).
DO NOT push the cardtoo strong, this could damage the card slot or the storage card.
Browse files in the storage card
To browse the files you shoulddo one of the following:
● Select “Explorer” icon to view files in the storage card;
● You can also install and run any other third party file browser applications.
Remove the storage card
To avoid data loss or damage, please stop using files/programs in the storage card, and then tap
Settings>Storage>Unmount SD card to remove it safely.
To remove the storage card, unlock the memory card tray, open it and pull the card
[Note]:
1. Make sure the location and direction of the storage card is correct when inserting.
2. To avoid possible issues or incompatibility of the storage card with your MultiPhone, major brands of
storage card are recommended. Never use damaged or crackedstorage cards as this might damage the
MultiPhone or cause loss of your data
2.3 Hot plug of storage card
Please do not hot plug the storage card when using or browsing its files.
For example, when you are running the Music/Video Player/ Gallery, the storage card could be
damagedand files on it mightbecomecorrupt if you take out the storage card without proper
preparation. As for details of inserting/removing storage card, see 2.2 Using the storage card.
2.4 Memory space
The capacity of built-in flash chip is 4GB. The device contains 2 memory partitions: Internal storage
&NANDFlashstorage. The space is partitioned to store apps, setting and user data. A part of storage will
be reserved for system resources and wouldn’t be available for user. The exact size of available memory
may vary depending on Firmware version.
MultiPhone supports extended storage – micro SD cards of 32GB maximum capacity.