User's Manual

USER MANUAL | MultiPhonePAP4040 DUO
9
In order to install the battery, please remove the back cover and put the battery into the battery
compartment, matching its contacts to the contacts of the phone set.
You can see battery status on status bar of MultiPhone in the lower right corner of the home
screen. Android OS has battery charge detection system and notify user if battery charge is low and
device need to be connected to AC adapter. If you will see such message, or your device couldn’t power
on, connect original AC power adapter to charge your device. Plug one end of the adapter into the
power jack of the device, and the other to the power socket (see the picture below).
To extend the battery operation life, wait for finish of charge process.Please, fully charge your new
device after unpacking.
Alternatively, you can charge your smartphone by connecting it via USB cable to the USB port of
computer. But please be informed, that in this case, due to lower power output of USB bus, the charging
can take more time.
[Note]: it is normal if the device is warm or hot during charging, you can use it as usual, just follow the
respective security precautions.
Please be informed, that Li-Ion battery is considered to be a consumable part of your MultiPhone, it’s
rated capacity might fall up to 50% during first two years from the date of purchase; such reduction of
capacity is not a defect and is not covered with warranty.
DO NOT throw the battery in municipal waste.
2.2 Using the storage card
Your new Prestigio MultiPhone4040DUO Smartphone is equipped with Micro SD card slot toextend
available device memory. It is compatible with Micro SD/ Micro SDHC/ TF-Flash card formats of size up to
32Gb. Proper functioning of larger capacity cards is not guaranteed.
Insert the storage card
The storage card slot is located on theback side of the device, next to SIM card slots, and is
protected with a back cover.