User's Manual

12
2 Getting Started
Charge the battery
Prestigio MultiPhone comes with a built-in lithium-ion polymer rechargeable battery and is designed to use
only manufacture-specified original batteries and accessories. You can see battery status on status bar of
MultiPhone in the upper right corner of the home screen. Android OS has battery charge detection system
and notify user if battery charge is low and device need to be connected to AC adapter. If you will see such
message, or your device couldn’t power on, connect original AC power adapter to charge your device. Plug
one end of the adapter into the power jack of the device and the other to the power socket. To extend the
battery operation life, wait for finish of charge process. Please, fully charge your new device after
unpacking.
Power on/off
Power on
Press and ho ld the Power Button for few seconds. It will automatically enter the
Home screen after start-up screen.
Power off
Press and ho ld the Power Button and then tap on Power Off to power off the
device.
Sleep mode and locking the screen
Sleep mode suspends your device to a low power state while the display is off in order to save battery
power. You will still be able to receive messages while the device is in Sleep mode.
Note: If the device in sleep mode more than 30 minutes, the device will automatically turn off to save
electricity.
Wake up from sleep mode
To wake up your device manually, press the Power Button. You will then
see that the device has locked the screen.
Unlocking the screen
To unlock the screen, slide the icon towards the icon on the right.
After unlocking, the device will resume the screen before locking. Also
see the chapter Settings/Location&security settings/Screen unlock.
Shutdown the screen to save battery power
Short-press down the Power Button once
Activate the locked screen.
Short-press down the Power Button again