Operation Manual

The ADR player will be automatically generated after TF format. The file
will be shown on the screen once open the TF card by computer. Click ADR Player, the
interface will be as below: (Note: for more detailed info about ADR player, please refer to
CD)
①
Video Display Area: Display the current playing video
②
GPS Information Display Area: Display the GPS information of the current
video including GPS coordinates and driving speed
③
Map Display Area: When ADR Player has connected to Google Map via
network and the current playing video has GPS information record, the area
will display the drive route
④ G-Sensor Display Area: Display G-Sensor information.
⑤
Progress Slider Bar: Show the progress of playing video and end user can
drag mouse to any desired location on slider bar for playing video
⑥
Video Group List: Display all video groups in the SD Card; Video group is a
combination of continuous video clips.
⑦
Video Clip List: Display all video clips in the SD Card; ADR Player lists videos
in clips
z Select a video group and press
save video button, the interface
will be as left figure; Check the
checkbox you want on the clip IDs
or check “ Save All” checkbox and
press” Save File” button to export
and save video clips to AVI files.
ADR player of DVR
EN
EN - 6
1. Tap on Bluetooth icon on
the main menu to start using
Bluetooth function.
2. The link status is shown at the
bottom of the interface.
3. Tap on to exit the current
function.
4. Tap on in Bluetooth
interface to start pairing with mobile
phone device with GPRS function.
5. Please make sure Bluetooth
function on mobile phone is
detectable by other devices.
6. “Connected established” will be
displayed upon the successful
pairing.
7. Tap on in Bluetooth
interface to enter the Phone
Keyboard.
8. Tap on digit buttons and tap on
/ / to start Dialing,
Backspace, and enter Dial Record.
Bluetooth Function