Contents 1. Important safety instructions ……………….…………………... 2 2. Accessories ………………………………………………………… 3 3. View of main unit …………………….………………..................... 4 4. Device connections ……………………….………….................... 6 5. Cautions on battery charging ………….………………………… 8 6. Getting started ……………………………………………………… 9 7. Device settings ……………………………………………………… 10 8. Program interface ………………...………………………. 11 9. Autorouting ……………………………….……………................ 15 10.
Important Safety Instructions The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION 1. 2. To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
Accessories Prestigio GeoVision 5500 Accessories List ITEM NAME QTY Car Charger 1 Stereo Earphones 1 USB Cable 1 Stylus Pen 1 Stylish Carry Case 1 User Manual 1 Warranty Card 1 Driver/Document CD 1 EN-3
View of Main Unit Front and Side View 2 3 4 5 6 1. 2. 3. 4. 5. 6. 1 LCD Touch Screen Tap the screen with touch pen or finger to select menu commands or to enter information. Battery Status Indicator The indicator glows in bright green colour when battery is fully charged and in red color when charging. microSD Slot Receiving microSD memory card for data access or memory expansion. micro USB Port Connection to USB Cable for data access or battery charging Reset Button Press to reboot the device.
View of Main Unit Rear and Top View 2 1 1. 2. Speaker Emits sound, voice or music. Power Button Press to power the device ON/OFF.
Device Connections Inserting microSD Card To insert a microSD card, place the connector towards the device and the card label towards the front side of the device. To remove a microSD card, gently press the edge of the card to release the safety lock and pull the card out of the slot. NOTE: Please always make sure that no application is accessing the microSD card before extraction. Connecting to External USB Device (Charging) EN-6 Insert the USB connector into the appropriate USB port.
Device Connections Connecting to Car Charger Insert the USB connector into the appropriate USB port. Insert car charger connector into vehicle 12V accessory/cigarette socket to start charging. NOTE: Please connect the car charger to vehicle 12V accessory/cigarette socket after the vehicle engine is started to protect the device from sudden surges in current.
Cautions on Battery Charging About Rechargeable Battery The device is equipped with a built-in rechargeable battery. Please fully charge the battery (for at least 5 hours) before initial use. The battery status indicator glows in red colour when charging and turns bright green colour when charging is complete. Charging time is approximately 4 hours. Working conditions and precautions for the rechargeable battery Devices with new batteries should be fully charged before initial use.
Getting Started 1. Press and hold Power Button to turn on the device. 2. Shortly after the greeting screen is shown, the main menu will be displayed. 3. Tap the corresponding buttons with touch pen included to navigate through various functions. 4. Press and hold Power Button to turn the device off or to allow the device to enter sleep mode. 5. Tap Sleep icon to put the device to sleep mode or Power Off icon to turn the device off.
Device Settings In the main menu, tap on to enter the device settings. Tap to display other settings. Volume Adjust sound volume, mute device, or enable warning messages. Backlight Adjust the brightness of touch screen, enable/disable auto backlight. Language Select desired language. DateTime Set up Time Zone/Date/Time. Calibration Calibrate the screen when position deviation occurs. USB Set the data transmission mode between the navigator and computer.
Program interface No. Name Function Press the compass loon to edit map rotation mode, map view and day/night mode. 1 Compass 2 Sound 3 Next maneuver Next maneuver on the way and distance up to it. Press this Icon to open route options menu. 4 GPS-cursor If GPS connection is established, displays your current location. 5 Information panels Displays time until the end of the trip, total route length, and arrival time. 6 Route Press this button to turn on/off voice and sound effects.
Program interface No. Name Function 7 Speedcam window When you approach a speed camera with visual warnings being activated the window will appear In upper right comer at the screen. This window shows you permitted speed and distance left. Press the window to turn On/Off speed exceeding sound warnings.
Program interface No. Name Function 16 Speedcam window When you approach a speed camera with visual warnings being activated the window will appear In upper right comer at the screen. This window shows you permitted speed and distance left. Press the window to turn On/Off speed exceeding sound warnings. 17 Speed Current speed. Available only with GPS connection established. 18 Information panel Shows street name you are currently moving on.
Program interface No. Name Function 21 Track record Track record. Green icon - track record enabled, white icon function disabled. 22 Mark on map Touch the screen with a stylus to set a mark. You can save this mark as a way point add it to the route or see object’s characteristics the mark was set on. 23 Object of interest Different objects on map (traffic lights, metro stations, petrol stations etc.).
Autorouting Route to the object from search To create a route to the object, which address you know, press the «Find» button at the left bottom of the screen(1]. Select the «By Address» menu(2]. Press the city select button(3] and enter its name(4]. To minimize keyboard press the icon at the right top of the screen. Select the needed city(5]. Similarly select street(5] and building(6]. After you select building. it will be shown on the map[7]. Press the «Go to» button to create a route to it.
Autorouting Route to the selected mark on the map You can set a route to any mark on the map. This mark will be the end point of your route while the start will be in your current location. To create a route, create a mark by pressing a map in the necessary place[1]. Then press the «Cursor» and the “Go to” button In the appeared panel(2). The route is created[3].
Additional features If your device has GSMfGPRS-module, you will be able to use some «Navitel Navigator» software features like «NaviteLTraffic» and .NaviteLSMS» services Navitel.Traffic 1 Using this service you can see the traffic situation in Russia, Ukraine, Belarus or any other country you have official map for. To set the service, go to “Settings” -> «On-line services» -> ”Traffic Jams”.
Troubleshooting Take steps described in the tables below to solve simple problems before contacting customer service. NOTE: Immediately turn off the device and disconnect the power adapter if the device is not working properly. Never try to repair the unit without authorized professionals for it may damage the unit. PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION The adaptor is not connected well. Connect the adaptor correctly. The built-in rechargeable battery is weak.
Troubleshooting PROBLEM Irregularity or instability in signal receiving. POSSIBLE CAUSE POSSIBLE SOLUTION The built-in rechargeable battery is weak. Use the adaptor to supply power or charge the battery. The unit may be obstructed by material, such as heat insulation paper. Remove the material. The movement of the unit is too strong. Avoid any movement of the unit.
