Quick Start Guide

The most important and most often used screen of Prestigio GeoVision is the
Map screen. The map looks similar to a conventional road-map. The blue arrow represents your current position, and the green line shows the recommended route. There are several screen buttons and data fields on the screen to help you navigate. Their functions are explained in detail in the User Manual. During navigation, the screen shows route information and trip data (left screenshot), but when you tap the map, additional buttons and controls appear for a few seconds (right screenshot). Most parts of the screen behave as buttons.
or : Switches between 2D (classic top-down view) and 3D
(perspective view for navigation) map modes.
: Opens the Navigation menu.
If you have moved the map, a
button appears. Tap this button
to
move
the map back to the current GPS position.
Map Screen
EN
EN - 8
Take steps described in the tables below to solve simple problems before contacting customer service.
NOTE: Immediately turn off the device and disconnect the power adapter if the device is not working properly. Never try to repair the unit without authorized professionals for it may damage the unit.
Troubleshooting
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
There is no sound.
The volume may be turned down or mute.
Turn up the volume or turn on the sound output.
Users can’t turn on the unit.
The adaptor doesn’t connect well.
Connect the adaptor correctly.
The built-in rechargeable battery is weak.
Use the adaptor to supply power or charge the battery.
There is no picture.
The brightness may be turned down.
Adjust the brightness of the LCD.
The unit can’t receive satellite signals or can’t orient.
The unit may be obstructed by buildings or metal block.
Make sure to use the unit out of room; if in the vehicle, you can use the external GPS antenna to solve this problem.