Quick Start Guide

When Prestigio GeoVision is started the first time, you need to select whether to start the program in Simple mode or in Advanced mode. The two operating modes of Prestigio GeoVision mainly differ in the menu
structure and the number of available features. The controls and screen layouts are the same.
•
Simple mode: you have easy access to the most important navigation
functions and the basic settings only. The rest of the settings are set to values that are optimal for typical use.
•
Advanced mode: you have access to the full functionality of Prestigio
GeoVision.
This Guide covers actions in Simple mode. See the User Manual for detailed instructions on both modes. Later you can switch between the two operating modes:
•
To switch from Simple mode to Advanced mode: on the startup screen
(Navigation Menu), tap
, .
•
To switch from Advanced mode to Simple mode: on the startup screen
(Navigation Menu), tap , .
GPS
After selecting Simple mode, the Navigation menu appears. From here you can reach all parts of Prestigio GeoVision. The Navigation menu contains the following options:
•
Tap to specify an address as your destination.
•
Tap for the list of recent destinations.
•
Tap to select one of the stored Points of Interest.
•
Tap for the list of your favourite destinations.
•
Tap to navigate or to browse the map.
•
Tap to customise the way Prestigio GeoVision works.
•
Tap to stop navigation, and exit Prestigio GeoVision.
Navigation Menu
EN
EN - 5