Security Datasheet

Product name: Vaseline techn gelb, P 2046
Revision Date: 08.12.2022
Version: 1.1
Print date: 12.12.2022
SDS_DE - EN - 000000000601451751
4/9
Appropriate engineering
controls:
Provide adequate ventilation. Ventilation rates should be matched to condi-
tions. If applicable, use process enclosures, local exhaust ventilation, or
other engineering controls to maintain airborne levels below recommended
exposure limits. If exposure limits have not been established, maintain air-
borne levels to an acceptable level.
Individual protection measures, such as personal protective equipment
General information:
Wash hands before breaks and after work. Use personal protective equip-
ment as required. Personal protection equipment should be chosen accord-
ing to the CEN standards and in discussion with the supplier of the personal
protective equipment. The usual precautionary measures should be ad-
hered to inhandling the chemicals or the mineral oil products.
Eye/face protection:
Avoid contact with skin and eyes. Goggles/face shield are recommended. If
risk of splashing, wear safety goggles or face shield.
Skin protection
Hand Protection:
Material: Nitrile butyl rubber (NBR).
Min. Breakthrough time: >= 480 min
Recommended thickness of the material: >= 0,38 mm
Avoid long-term and repeated skin contact. Suitable gloves can be recom-
mended by the glove supplier. Use skin protection cream for preventive
skin protection. Protective gloves, where permitted in acc. to safety direc-
tions. The exact break through time has to be found out by the manufactur-
er of the protective gloves and has to be observed.
Other:
Do not carry cleaning cloths impregnated with the product in trouser pock-
ets. Wear suitable protective clothing.
Respiratory Protection:
Not relevant, due to the form of the product.
Thermal hazards:
Not known.
Hygiene measures:
Always observe good personal hygiene measures, such as washing after
handling the material and before eating, drinking, and/or smoking. Routinely
wash work clothing to remove contaminants. Discard contaminated foot-
wear that cannot be cleaned.
Environmental Controls:
No data available.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance
Physical state:
solid
Form:
Paste
Color:
White
Odor:
Odorless
pH:
Not applicable
Drop Point:
40 - 80 °C
Boiling Point:
not determined