User's Manual

Tutorials

Technical

Information

Overview

Controls &

Connections

Recording

Multiple

Mixers

5 Tutorials

5.1 Studio One Artist Quick Start

5.1.5 Creating a Song

To begin recording, create an audio track, assign it to Input 1, and connect a microphone to the rst

channel on the StudioLive. Select the record enable and monitor on your track in Studio One Artist.

Turn up the Channel 1 gain knob on the front panel of the FireStudio Project while speaking/singing

into the microphone. You should see the input meter in Studio One Artist react to the input. Adjust the

gain so the input level is near its maximum without clipping.

Connect a set of headphones to the StudioLive headphone output and select enable the Main button

in the Monitor section on your StudioLive. You may also wish to connect monitors to the StudioLive‘s

Control Room Outs. You are now ready to record. For complete instructions, please consult the Studio

One Reference Manual, which is located on your Studio One Artist Installation DVD.

Creating MIDI Tracks

Step 1

Click on the Add Tracks button. When the Add Tracks

window launches, select Instrument as the Track Format

and click the OK button.

Step 2

To assign your MIDI input, click on the MIDI Inputs list

and select your external sound module.

If you have added Virtual Inputs to your session, you will

also see them as available inputs.

If you selected your MIDI keyboard controller as the

default keyboard, it will already be selected. If not,

choose your MIDI controller from Output menu directly

below.

Step 3

To the left of the Add Track button, you will nd the

Inspector button. Click it to display more parameters for

the selected track.