User's Manual
90
Tutorials
91
Technical
Information
Overview
Controls &
Connections
Recording
Multiple
Mixers
5 Tutorials
5.1 Studio One Artist Quick Start
5.1.4 Configuring Audio I/O
Step 5
Click on the Song Setup button to open the Song Setup
window, then click on the on the Audio I/O Setup icon.
Step 6
Click on the Inputs tab in the Audio I/O Setup window,
and you will see all of the available inputs on your
StudioLive. At this time, you can add the number and
type of inputs you plan to use. We recommend that you
create a mono input for each of the 16 inputs on your
StudioLive. If you plan on recording in stereo, you should
also create a stereo bus and assign it to the appropriate
set of inputs. You can remove any bus by simply selecting
it and clicking the remove button. To customize the name
of your buses, double-click on the default name to open
a text box. When you have nished typing, hit Enter.
If you would like the same inputs to be available every
time you launch Studio One Artist, click the “Make
Default” button.
Step 7
Click on the Outputs tab, and you will see all of the
available outputs on your StudioLive. At this time, you
can add the number of output buses to which you would
like to have access and can give them custom names. We
recommend that you create a mono output for each for
the 16 FireWire Returns on your StudioLive as well as one
Stereo Output assigned to FireWire Returns 17-18 to use
for your Main Output. In the lower right corner, you will
see the Audition select menu. This allows you to choose
the ouput from which you will audition audio les prior to
importing them into Studio One Artist. In general, you will
want this to be the Main Out bus.
If you would like this output conguration available every
time you launch Studio One Artist, click the Make Default
button.