User's Manual

44
45
2 Controls & Connections
2.8 Main Output Bus
Main Select Button
Enables Fat Channel Viewing.
As previously described in section 2.3.1, the Select button
routes its channel through the Fat Channel, allowing you
to add dynamics processing, EQ, panning, etc.
Main Fader
Controls the Level of the Main Output.
The fader controls the overall level of the main stereo
output.
The white area above the fader can be used as a scribble
strip. Use only oil pencils. Other types of pens or pencils
cannot be wiped off.
To clean the scribble strip, use a lightly damp cloth to
remove the writing.
Main Bus Meters
Displays the Level of the Main Output.
In the upper right corner of the StudioLive are the Main
meters, which display the output levels of the main stereo
bus.