User's Manual

34
35
Every setting in the Fat Channel can be copied from one to channel to another and can be saved
and stored as a user preset to be recalled later.
Press the Copy button to copy the settings
on the selected channel or bus. Every Select
button on the StudioLive, except the button
for the currently selected channel, will begin
to ash. The Select button for the selected
channel will not illuminate. You can copy a Fat
Channel setting from any channel or bus to any
combination of channels and buses. The Load
button will also start to ash.
To paste the current channel’s Fat Channel setting to another channel or bus, simply press that
channel’s Select button. It will stop ashing and illuminate. After you have selected every channel to
which you want the settings pasted, press the Load button. The StudioLive will return to its normal
state, indicating that the Fat Channel settings have been successfully pasted.
The Load button can also be used to recall
saved settings and presets. For complete recall
instructions, see Section 2.10.3
You can save your Fat Channel settings for future
use. To store the currently selected channel’s
Fat Channel settings, press the Save button. For
complete channel-preset storage instructions,
see Section 2.10.3.
2 Controls & Connections
2.3 The Fat Channel
2.3.5 Copy, Save, Load