User's Manual

Controls &

Connections

Recording

Tutorials

Technical

Information

Multiple

Mixers

Overview

2 Controls & Connections

2.3 The Fat Channel

2.3.2 Dynamics Processing and EQ

High Mid EQ Button

Activates Controls for the High Mid Band EQ for the

Selected Input or Output Bus.

This button actives the control for the High Mid band for

the selected input or output. The button will illuminate to

indicate that the control is active.

The High Mid Band EQ is available for all input and

output buses.

High Mid Band EQ Frequency

Control

Sets and Displays the Center Frequency of the High

Mid Band EQ.

This encoder sets, and the meter displays, the center

frequency of the High Mid band. You can adjust the Q

from 380 Hz to 5 kHz.

Hi Q Button

Enables a Narrow Bandwidth for the High Mid Band

EQ on the Selected Input or Output.

Q is the ratio of the EQ band’s center frequency to its

bandwidth. With a constant center frequency, higher Q

values indicate a narrower bandwidth. By default, the

High Mid EQ is set to a low Q = 0.55. When the Hi Q

button is engaged, the bandwidth will narrow to 2.0 to

provide more exact control.