User's Manual

121

volume and panning for each mic in the mix. Choose the Select button above Subgroup 1. In the

Fat Channel’s Stereo section (to the right of the Pan display), enable Link, and turn the Pan knob all

the way clockwise to set the stereo pan to hard left and right. Now Subgroups 1 and 2 are linked,

with Sub 1 panned hard left and Sub 2 panned hard right. The channel panning is preserved.

Now assign Subgroup 1 to the Main outputs; since Subgroup 2 is linked to Sub 1, it is automatically

assigned to the Main outs as well. You can now use the Fat Channel section to add dynamics

processing and EQ to the stereo drum group. Subgroup 1’s fader controls the level for the left side

of your drum mix, and Subgroup 2’s fader controls the right side.

5 Tutorials

5.5 Subgroup mixing

5.5.1 Instrument Groups