Owners Manual
Table Of Contents
- 1 Overview
- 1.1 Introduction
- 1.2 What is in the Box
- 1.3 Companion PreSonus Products
- 2 Hookup
- 2.1 Front Panel Connections and Controls
- 2.2 Back Panel Connections
- 2.3 Connection Diagram
- 2.3.1 Studio 1824c
- 2.3.2 Studio 1810c
- 3 Connecting to a Computer
- 3.1 Installation for Windows
- 3.2 Installation for macOS
- 3.3 Firmware Updates
- 3.4 Using the Studio-series interfaces with Popular Audio Applications
- 4 UC Surface Monitor Control Software
- 4.1 UC Surface Launch Window
- 4.1.1 Loopback Recording (Windows only)
- 4.2 UC Surface Controls
- 4.2.1 Channel Controls
- 4.2.2 Device Controls
- 4.3 The Settings Page
- 5 Studio One Artist Quick Start
- 5.1 Installation and Authorization
- 5.2 Setting Up Studio One
- 5.2.1 Configuring Audio Devices
- 5.2.2 Configuring MIDI Devices
- 5.3 Creating a New Song
- 5.3.1 Configuring Your I/O
- 5.3.2 Creating Audio & MIDI Tracks
- 5.3.3 Recording an Audio Track
- 5.3.4 Adding Virtual Instruments and Plug-in Effects to Your Song
- 5.4 Monitor Mixing with Z-Mix
- 5.4.1 Z-Mix Functions
- 6 Technical Information
- 6.1 Specifications
- 7 Warranty
- 7.1 Warranty Information
20
5 Studio One Artist Quick Start
5.2 Setting Up Studio One
Studio Series 1810c and 1824c
Owner’s Manual
5.2.1 Configuring Audio Devices
1. In the middle of the Start page, you will see the Setup area. Studio One Artist
automatically scans your system for all available drivers and select a driver. By
default, it will choose a PreSonus driver if one is available.
Power User Tip: If your device has zero-latency monitoring functionality from within
Studio One, you will see the Z-mix icon. If you do not see this icon, make sure that you
have launched Universal Control. PreSonus audio interfaces require their DSP mixing
control panels to be running in the background for Z-mix functionality.
2. If you do not see your device listed on the Start page when you launch Studio
One, click on the Configure Audio Devices link in the Setup area to open the
Options window.
In the Options window, click on the Audio Setup tab and
select your device driver from the pull-down.
5.2.2 Configuring MIDI Devices
From the External Devices window in Studio One Artist, you can configure
your MIDI keyboard controller, sound modules, and control surfaces. This
section will guide you through setting up your MIDI keyboard controller
and sound modules. Please consult the Reference Manual located within
Studio One for complete setup instructions for other MIDI devices.
If you are using a third-party MIDI interface or USB MIDI-controller
keyboard, you must install any required drivers for these devices before
beginning this section. Please consult the documentation that came
with your MIDI hardware for complete installation instructions.
If you do not have any MIDI devices, please skip to Section 5.3.