User Manual

12
3 Connecting to a Computer
3.3 Controlling Quantum Mic Preamps with MIDI
Quantum-series
Owner’s Manual
3.3 Controlling Quantum Mic Preamps with MIDI
Quantum microphone preamps can be controlled from the front panel, UC
Surface, or Studio One. If you configure your Quantum interface as a MIDI device
inside your DAW application, you can also control trim and phantom power from
within your DAW environment and store those settings with your session.
Below is a chart explaining the MIDI controls for your Quantum preamps:
Preamp MIDI Channel Trim Level Phantom Power ON /OFF
Preamp 1 Channel 1 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 2 Channel 2 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 3 Channel 3 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 4 Channel 4 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 5 (Quantum) Channel 5 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 6 (Quantum) Channel 6 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 7 (Quantum) Channel 7 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 8 (Quantum) Channel 8 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)