Use and Care Manual

Temperature Control
TEMPERATURE DISPLAY WINDOW
The temperature is displayed in digital which is the best way to be read out. The digital is shown as
When the temperature probe is out of order, the display window will show with “HH”or “LL” instead
•
the set temperature when you are setting the temperature, and it will change to be the real
temperature of the inside cabinet after 10 seconds without being touched.
•
of a digital figure while continuous buzz sound will be heard. In case of this happens, this appliance is
considerately designed to keep periodical running of compressor and fans which helps to keep the
coldness of the inside cabinet to protect your stored wines.
Warning: To avoid destroying your stored wines, it is strongly recommended to have the
.
appliance repaired immediately, as the spare periodical running can not ensure the appliance to achieve
the temperature you have set.
TEMPERATURE SETTING
emperature setting range is 5-18 The t ºC(41-64ºF).
•
Directly touch the or mark to set the wine cooler temperature as you want.
The first touch on
or mark will recall the previous set temperature displayed.
Touch the mark to increase the set temperature by 1ºC (or by 1ºF).On the contrary, touch the
The digital will change to display the real temperature of the inside cabinet after 10 seconds without being
•
•
•
•
mark to decrease the set temperature by 1ºC (or by 1ºF).
touched.
•
Note:
For the first time to use the appliance or to restart the appliance after having been shut off for a long time,
you may find a few degrees variance between the set temperature and the displayed temperature. It will be
normal after a few hours running.
Touch the marks with 2 fingers at the same time and hold for 5 seconds, you can interchange the
SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
Fahrenheit and Celsius display.
7