Use and Care Manual

Installtion Instruction
Before using the wine cooler, remove all packaging materials including bottom
cushions and foam pads and tapes inside the wine cooler, tear off the
protective film on the door and thewine cooler body.
The wine cooler is placed in a well-ventilated indoor place; the ground shall
be flat, and sturdy (rotate left or right to adjust the wheel for leveling if
unstable).
Placement
Start
Keep away from heat and avoiddirect sunlight. Do not place the wine cooler
in moist or watery places to prevent rust or reduction of insulating effect.
5
The wine cooler shall stay for half an hour before connecting 115V/60Hz
power when it is firstly started.
The wine cooler shall run 2 to 3 hours before loading wine; thewine cooler
shall run for more than 4 hours in summer in advance considering that the
ambient temperature is high.
Please leave enough space to ensure feasible opening .
Dimensions shown are for reference only.
69.3inch
23.4inch
22.4inch
23.4inch