Use and Care Manual

- 18 -
Noise that can be removed easily
The noise caused by unevenness of placement of wine cooler
You can use gradienter to correct and level the wine cooler. You can use
screw leg to level it or you can place mat under the wine cooler to level it.
The noise generated when the wine cooler leans against other furniture.
Move the wine cooler away from the furniture or equipment, against which the
wine cooler leans.
The noise caused by mutual touch of vessels
Slightly separate the bottles or vessels from each others
Troubleshooting By Yourself
Before you call the after-sales service phone number, please check if you are
able to remove the failures according to the following hints.
Failures
Possible Causes
Remediation Measures
Temperature is quite
different from setting
value
Sometimes, the problem
can be removed if you
just turn off power of the
wine cooler for 5
minutes and then restart
it.
If the temperature is too
high, you can check it
several hours later to
see if the temperature is
consistent with the
setting value.
If the temperature is too
low, you can check the
temperature again in the
next day.
The inside of wine
cooler is not cold
You open the door of
wine cooler very often;
You place too many
Wine bottles in it
Reduce the frequency to
open the door of wine
cooler.
Wait for 4 – 5 hours.