WINE COOLER REFRIGERADOR DE VINO Model/Modelo: PWC456MS This product is for domestic use only Use & care manual Important safeguards
Content Important Safety Instructions…………………………………………3 Hint for Castoff Disposal……………………………………………….4 Hints on Safety & Warning…………………………………………….5 Before Using Your Wine Cooler………………………………………7 Installation of Your Wine Cooler………………………………………7 Placement of Wine Cooler …………………………………………….8 Connect Wine Cooler with Power Source…………………………..8 Know About Wine Cooler………………………………………………9 Installation of Handle………………………………………………….
Important Safety Instructions WARNING To reduce the risk of fire, electrical shock, or injury when using your Wine Cooler, follow these basic precautions: This appliance is intended to be used in household and similar applications such as – staff kitchen areas in shops, offices and other working environments; – farm houses and by clients in hotels, motels and other residential type environments; – bed and breakfast type environments; – catering and similar non-retail applications.
Hint for Castoff Disposal Disposal of Waste Package The package is used to protect the wine cooler during the transportation. All the materials are harmless to environment and reusable. To know the current channel for disposal of castoff, please consult your professional dealers or the local administrative authority. Warning For the discarded wine cooler: 1. Please pull out the plug of power source. 2. Please sever the electric cord and take it off with power plug.
Hints on Safety & Warning Before Operation of Wine Cooler Please read the User Manual carefully! It contains some important information on placement, use and maintenance of wine cooler. Please keep all the data for future use or the next user of the wine cooler. Technical Safety The wine cooler contains a little cooling agent, which is harmless to the environment. Please pay attention not to damage the loop pipeline of the cooling agent in the transportation or installation process.
Otherwise, the cooling agent pipeline may be damaged. The ejected cooling agent may cause injury to eyes. Do not store products that contains combustible gas (such as: spray bottle) or explosive materials in the wine cooler. Danger of Explosion! Do not use steam type cleaning equipment to clean the wine cooler or defrost! Steam may enter the electric elements and cause short circuit. Do not use the base or the door of the wine cooler as footplate or support.
Before Using Your Wine Cooler Remove the exterior and interior packing. Check to be sure you have all of the following parts: 5 Shelves 1 Bottle/Can Basket 1 Instruction Manual Before connecting the Wine Cooler to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. Clean the interior surface with lukewarm water using a soft cloth.
After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing items in the compartment. Placement of Wine Cooler The wine cooler should be placed in dry and ventilated room. The location of the wine cooler should not be irradiated by direct sunshine. The wine cooler should be far away from heating sources, such as: cooking stove or heating radiator.
The power socket should be in such as place, where is reachable conveniently. Please use a socket that’s installed according to the requirements. The wine cooler should be connected with 115V/60Hz AC power.( Warning! In any case, please do not connect the wine cooler to the electronic energy saving power plug or the converter (such as: solar energy equipment, ship’s electric grid) that convert DC into 115V AC. Know About Wine Cooler ① ② ③ ④ ⑤ ⑥ Fig.
Please choose the following handle installation instruction according to your actual needs. 1. Set the handle on the fixation shaft. Fixation Shaft of Handle Set Handle 2. Screw down the fixation pins of the handle with screw driver. Handle Fixation Pin Screw Driver 1. Set the handle on the fixation shaft.
Set Handle 2. Screw down the fixation pins of the handle with screw driver. Handle Fixation Pin Screw Driver Set Handle Fixation Shaft of Handle 1. Set the handle on the fixation shaft. 2. Screw down the fixation pins of the handle with screw driver.
Handle Fixation Pin Screw Driver Level the Wine Cooler Place the wine cooler on the planned location and level it. The front screw leg is adjustable.
Indication of Temperature in Lower Chamber : Press this button once and the temperature increase 1°C. : Press this button once and the temperature decrease 1°C. Indication of Temperature in Upper Chamber : Press this button once and the temperature increase 1°C. : Press this button once and the temperature decrease 1°C. : Temperature display. LIGHT: Lighting button for LED lamp; it controls the on/off of lamp. POWER: On/off button used to turn on/off all load.
In the operation of compressor, the back wall of the chilling chamber will form water ball or frost because this is determined by the functions of wine cooler. You do not need to defrost or wipe off water drops because the back wall is able to defrost automatically. The defrosted water will be collected to discharge channel and the water will flow to the water receiver above the compressor and will be vaporized there.
The upper area has the highest temperature The lower area has the lowest temperature Placement of Wine cooler Please store different wines according to the following sequence from up to down: Strong red wine Rose wine and gentle red wine White wine Champaign and light sparkling wine We recommend pour wine into glass at the temperature lower than the drinking temperature because the temperature of wine will increase quickly when it’s poured into glass.
the temperature of the wine will increase 1 - 2°C immediately! Drinking Temperature The correct temperature of pouring wine determines the smell of wine, as well as the taste of wine.
Cleaning Wine Cooler You should do the following operation: 1. Pull out power plug or disconnect the protecting device! 2. Scrub the sealing parts of the door only with clean water and soon wipe the water off thoroughly. 3. Please clean the wine cooler with slightly warm water and a little detergent agent. Do not splash water to the operation control element or the lighting system on the glass door. 4.
Noise that can be removed easily The noise caused by unevenness of placement of wine cooler You can use gradienter to correct and level the wine cooler. You can use screw leg to level it or you can place mat under the wine cooler to level it. The noise generated when the wine cooler leans against other furniture. Move the wine cooler away from the furniture or equipment, against which the wine cooler leans.
The wine cooler doesn’t cool down LED lamp is not on Glass door have congealed dew The wine cooler is disconnected with power source of the power supply has stopped; the power plug is not inserted firmly LED lamp is damaged Indoor temperature and humidity is too high, temperature of wine cooler was set too lower. - 19 - Press POWER button; Check if power supply is connected.
Manual de uso y cuidado Precauciones importantes Éste producto es para uso doméstico únicamente
