Use and Care Guide

3.2 Temperature Control

Note:

The picture above is only for reference. The actual configuration will depend on the physical

product or statement by the distributor.

①

②

③

④

⑤

Setting button

Press repeatedly to toggle among the //// temperature settings.

Release to select desired setting.

SET TEMPERATURE

When the refrigerator is powered on, the display screen shines for 3 seconds, the default

temperature is MID(③ gear).

When there is a failure, the corresponding LED lights show the fault code (loop display); the

LED light displays are shown on the following table:

Notes:

MEMORY FUNCTION

The refrigerator can keep memory of running status when suddenly power goes off and will

automatically enter the previous temperature setting when power goes on again.

Error description

LED

①,

②ﬂashing

LED

①,

③ ﬂashing

LED

①,

④ ﬂashing

Temperature sensor failure of refrigerator zone

Defrost temperature sensor failure of freezing zone

The ambient temperature sensor failure

Error code