Specifications

Page 6 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions
UNI-STA/UNI-EXT
THE EXACT CENTER OF THE STUD MUST BE LOCATED FOR CORRECT AND SAFE INSTALLATION.
Use an electronic stud nder (not supplied) to
locate the center of the stud that is in the wall.
Wood Stud
Stud nder
Height
Mark
(from page 5)
Wood Stud
Marking
Wall
Plate
Do NOT over-tighten lag bolts when attaching the mount to the wall. Improper installation may result in personal
injury or damage to property.
Once the mounting points have been marked, use a
¼˝ drill bit and portable drill to drill the pilot holes.
Drill
Marking
Wood Stud Installation
Mounting Point
Mark
Step 1
Step 2
Step 4
Use a pencil to mark the rst mounting point, just
above your height mark (from page 5).
Step 3

Use the level to make sure the wall plate is level from
side to side.
®
Place the wall plate over the rst mounting point mark
and use a pencil to mark the rest of the mounting
points.
Four (4) mounting points must be used. Two (2)
upper mounting points and two (2) lower mounting
points.