Specifications

UNI-STA/UNI-EXT
Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 15
Attaching the Universal Projector Plate (cont’d)
Step 7

Attach the Universal Projector Plate to each of the
mounting legs by inserting and tightening one (1) M6
x 12mm screw through the Universal Projector Plate
into the M6 square nut on each of the mounting legs.
Single Mount Point Installation
A single ¼-20 x
5
/16″ screw must be used to attach the
Universal Projector Plate to the projector if your projector
has only one mounting point.
Do not overtighten the mounting screws.
You can use either the standard Phillips head or
Lock-It™ security hardware.
Proceed to the “Attaching the Projector” section.
Step 6
Tighten the mounting screws to the projector.
Do not overtighten the mounting screws.
®
Insert one (1) Barrel Cap into the end of each leveling
barrel.
Proceed to the “Single Mount Point Installation”
section.
Do not overtighten the mounting screws.
You can use either the standard Phillips head or
Lock-It™ security hardware.