Specifications

Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 11

Raise the base box to the upper mounting bracket.
®
Align the two (2; one each side) mounting holes.
¯
Using a security wrench, insert and tighten two (2)
M6 x 12mm security head screws.
°
Attach the projector to the base box, referring to
the PDS-PLUS installation instructions for nal
adjustments.
Please review the installation instructions that
came packaged with the projector before
attaching the projector to the upper mounting
bracket.
Do not overtighten the screws.
Low Prole Bracket Installation
Attaching the Base Box to the Upper Mounting Plate
M6 x 12mm Screws
M5 Security Wrench
Adjustable Mounting Bracket

Using a M5 security wrench, remove the four (4)
M6 x 12mm security screws by rotating the security
wrench counterclock-wise.
®
Slide the adjustable mounting bracket off the upper
mounting bracket.
Proceed to the “Attaching the Base Box to the Upper
Mounting Plate” section.
Upper Mounting Bracket
UNI-STA/UNI-EXT
The M6 x 12mm security head screws must be
mounted from the underside of the base box.
Projector dimensions differ between
manufacturers. If the projector hangs too low from
the UNI-STA/UNI-EXT, the adjustable mounting
bracket may be removed. This will allow you to
attach the base box directly to the upper mounting
bracket for an even lower prole installation.
Base Box M6 x 12mm Screws
Security Wrench
The PDS-PLUS comes with optional security
hardware (Lock-It™ Security Pack) that my be
installed for added security.
Proceed to the “Attaching the Universal Projector
Plate” section.