Specifications

Page 10 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions
UNI-STA/UNI-EXT

Raise the base box to the upper mounting bracket.
®
Align the two (2; one each side) mounting holes.
¯
Using a security wrench, insert and tighten two (2)
M6 x 12mm security head screws.
°
Attach the projector to the base box, referring to
the PDS-PLUS installation instructions for nal
adjustments.
Attaching the Base Box to the Adjustable Mounting Bracket
The M6 x 12mm security head screws must be
mounted from the underside of the base box.
Base Box
M6 x 12mm Screws
Security Wrench
Adjustable Mounting
Bracket

Slide the extension arm into the open end of the
UNI-STA (the front of the mount).
®
Adjust length so that the center of the adjustable
mounting bracket matches the throw distance
calibration.
¯
Line up the mounting holes on the extension arm
with the mounting slots on the UNI-STA.
°
Using a screwdriver, insert and tighten two (2)
M6 x 12mm security head screws and M6 at
washers through the external slide plate and
tighten.
±
Attach the projector.
Please refer to Attaching the Base Box to the
Adjustable Mounting Bracket (above) for steps on
attaching the projector.
M6 x 12
Security
Screw
Security Wrench
M6 Flat
Washers
Adjustable
Mounting
Bracket
UNI-STA
If the extension arm is purchased at a later date, the end cover must be removed prior to installing the extension
arm.
Please see the Operator’s Manual to determine the correct throw distance (the distance from the projector to the
screen). The throw distance must be determined prior to mounting the projector (Page 8).
Extension Arm
(Optional)
Extension Arm Installation (Optional)
External Slide
Plate
Do NOT overtighten these screws.
Proceed to the “Low Prole Bracket Installation”
section.