Specifications

PTFM3765
Page 8
Visit the Premier Mounts website at http://www.mounts.com Installation Instructions
Installing the Wall Plate (cont’d)
Use a tape measure to measure the distance from
the bottom edge of the wall plate to the centerline
mark on the fl at panel.
Record this measurement on a piece of paper as
Distance A.
Step 5

Determine whether your fl at panel will be viewed from a seated or standing position.

When standing or seated, identify a point on the wall in your selected viewing area that is horizontal with your
eye level.

Use a pencil and lightly mark the wall at the eye level point you identifi ed in Step II.

Use a tape measure to measure the distance from the fl oor to the mark you made at eye level. Record this
measurement on a piece of paper as Distance B.

Add the values for Distance A and Distance B. Record this measurement on a piece of paper as Distance C.

Use a tape measure to measure Distance C on the wall.

Use a pencil and lightly mark the wall at Distance C. This will be the location of the bottom of the wall plate.
Proceed to the “Determining the Mounting Surface” section.
Step 6
Floor Line
Center of
Flat Panel
A
B
C