Specifications

PTFM3765
Page 6
Visit the Premier Mounts website at http://www.mounts.com Installation Instructions
Installing the Wall Plate
Determining the Viewing Height
Step 1
Use a tape measure to measure the distance between the top mounting points on your fl at panel.
Is the distance between the mounting points greater than 29.5"?
If No, skip to Step 4 .
If Yes, proceed to Step 3 .
Step 2
You must establish the viewing height of your fl at panel prior to installing your PTFM3765 mount. This will result in
making long-term viewing of your fl at panel more comfortable.

Place your fl at panel face-down on a soft, fl at surface.

Use a measuring tape to fi nd the vertical center of your fl at panel.

Use a pencil and lightly mark the vertical center of your fl at panel.
Measure from the outer-most top edge to the outer-most bottom edge.