Specifications

PDS-PLUS/PDS-PLUS-W
Page 6 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions
Installing the PDS-PLUS/PDS-PLUS-W
Ceiling Installation - Pipe
Step 1
Step 1

Use a stud nder to locate a ceiling stud closest to
your desired installation location.
®
Identify the center of the ceiling stud.
¯
Use a pencil to mark the location of the ceiling stud
center.
The PDS-PLUS/PDS-PLUS-W may be attached
to 1-1/2” standard threaded pipe (NPT), to one of
Premier Mount’s optional ceiling adapters, or to
a single wood stud. If using an optional adapter,
please refer to the installation instructions that
come with adapters.
To prevent the stud from splintering, use a 1/8”
wood drill bit to drill pilot holes.
Stud
Center

Secure the base box to the pipe with the M6 x 8mm
set screw and tighten it down using the M3 Security
Allen wrench (supplied).

After the pipe has been properly secured to the ceiling
structure, thread the base box to the lower portion of
the pipe.
Step 2
Unpack the PDS-PLUS/PDS-PLUS-W Mount and familiarize yourself with the components. Please take time before you
install the PDS-PLUS/PDS-PLUS-W to determine the location of where the PDS-PLUS/PDS-PLUS-W will be mounted.
M3 Security Allen
Wrench
Proceed to the “Ceiling Installation - Wood Stud”
section.
Ceiling Installation - Wood Stud