Specifications

P4263FP
Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.com Page 7
Installing the Wall Plate (cont’d)
➊
Place the wall plate against the wall and align it with
the pilot hole.
➋
Insert one (1)
5
/16″ x 3″ lag bolt and one (1)
5
/16″
washer into the upper right mounting hole and
tighten using a socket wrench and ½″ socket.
Do not overtighten the lag bolt.
Step 4
Step 3
Step 5
Step 6
Drill a “pilot hole” in the center of the upper right mark
using a ¼″ drill bit and power drill.
Only use a ¼″ drill bit when drilling the pilot holes.
➊
Level the wall plate.
➋
Use a pencil to mark the remaining three (3)
mounting locations along the center of each wall
stud.
Two people are recommended for this step; one
person to level the wall plate and another person
to drill the pilot holes.
Drill a “pilot hole” in the center of each of the marks with
a power drill and a ¼″ drill bit.
Only use ¼″ drill bit when drilling the pilot holes.