Specifications

P4263FP
Page 6 Visit the Premier Mounts website at http://www.premiermounts.com Installation Instructions
Installing the Wall Plate
Introduction
Directional Mounting Arrow
The Directional Mounting Arrow stamped into the
top of the P4263FP wall mount indicates which
edge is the top.
Mounting Safety
Two people are recommended to for the
installation of this mount.
Wood Stud Installation
You must secure the wall plate to two (2) wall
studs with a minimum of four (4) lag bolts (2 lag
bolts for each stud found).
➊
Use a stud nder to determine the exact center of
wall studs in the vicinity of the wall plate.
➋
Use a pencil to mark the exact center of each of the
wall studs.
Step 1
Step 2
Two people are recommended for this step; one
person to level the wall plate and another person
to mark the wall stud location.
➊
Place the wall plate against the wall in the desired
viewing location.
➋
Adjust the wall plate to align the mount slots in the
wall plate with the center of the wall studs.
➌
Level the wall plate.
➍
Use a pencil to mark the upper right mounting
location along the center of the wall stud.
If you will be installing your P4263FP mount to wood
studs, proceed to the “Wood Stud Installation”
section.
If you will be installing your P4263FP mount to a
concrete wall, proceed to the “Concrete Installation”
section.
If you will be installing your P4263FP mount to a
steel frame, proceed to the “Steel Stud Installation”
section.
Determining the Mounting Surface
C
onc
rete
St
e
e
l
St
u
d
Wo
o
d
St
u
d
X
X