Specifications

P4263FP
Page 14 Visit the Premier Mounts website at http://www.premiermounts.com Installation Instructions
This section presumes that you have read and
understood these sections:
● Selecting the Proper Mounting Hardware
● Universal Washer Installation
● Universal Spacer Installation
➊
Place your at panel screen-side down on a soft, at
surface.
➋
Identify the number and location of the thread
inserts on the back of your at panel.
➌
Aligning the holes on each mounting bracket with
the thread inserts on the back of your at panel.
➍
Secure each mounting bracket to your at panel by
inserting a minimum of two (2) screws per bracket.
Do not overtighten the mounting hardware.
Proceed to the “Attaching the Flat Panel to the Wall
Plate” section.
Attaching the Mounting Bracket to the Flat Panel
Lock-It™ Security Barrel Installation (Optional)
Do not overtighten the locking screw.
Please read the following directions to install the
security barrel:
➊
Remove the locking screw from the mounting
bracket.
➋
Place the locking screw into and through the
security barrel (see illustration below).
➌
Re-insert the locking screw and security barrel into
the mounting bracket.
➍
Tighten the locking screw and security barrel until
seated in the mounting tab.
Optional security congurations include:
- PCB-CSL1 (sold separately)
- Padlock (Combination or Keyed; commercially
available)
Lock-It™ Security
Barrel
Locking Screw
Do not thread the locking screw any further once
it is even with the mounting tab (see illustration to
the right). Threading the locking screw any further
will prevent you from safely attaching the at
panel to the wall plate.
Mounting Tab
Proceed to the “Attaching the Mounting Bracket to
the Flat Panel” section.