Specifications

MVW46
Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.com Page 5
Installing the MVW46
Introduction
Dual-Pole Cart Or Stand Installation
Step 1
The Premier Mounts MVW46 Videowall Frame is designed for use with Premier Mounts’ dual-pole carts and stands,
as well as for ying from above. You may use one MVW46 as a standalone mount, or multiple MVW46s to create a
videowall display.
Please read through the safety instructions before installation.
Are you mounting the MVW46 to a cart or stand, or ying from above?
If dual-pole cart or stand, continue to Cart Or Stand Installation below.
If ying from above, go to Flying Installation on page 8.
Illustrations show only some of the installation
congurations possible with the MVW46s.
Figure 1
Insert the tubing of the Premier Mounts dual-pole cart(s) or stand(s) into the 2” circular cutouts of the MVW46(s)
depending on the installation (Figure 1).
Make sure the MVW46 keyhole mounting slots point down so that they can support the at-panel display(s) later
(Figure 2).
Figure 2
The keyhole mounting slots should point
downward.