Specifications

LMV
Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 7
Installing the Wall Plate (cont’d)
1) Place the wall plate against the wall and align it with
the pilot hole.
2) Insert one (1)
5
/16˝ x 3˝ lag bolt and one (1)
5
/16˝
washer into the upper right pilot hole.
3) Use a socket wrench and a ½˝ socket to tighten the
lag bolt.
Do not overtighten the lag bolt.
Step 4
Step 5
Step 6
1) Level the wall plate.
2) Use a pencil to mark the remaining four (4)
mounting locations along the center of each wall
stud.
Two people are recommended for this step; one
person to level the wall plate and another person
to drill the pilot holes.
Drill a “pilot hole” in the center of each of the marks with
a power drill and a ¼″ drill bit.
Only use ¼″ drill bit when drilling the pilot holes.
Step 7
1) Insert one (1)
5
/16″ x 3″ lag bolt and one (1)
5
/16″
washer into each pilot hole
2) Tighten all lag bolts using a socket wrench and ½″
socket.
Do not overtighten the lag bolts when attaching
the mount to the wall. Improper installation may
result in personal injury or property damage.
If you are using OPTIONAL model specic spacers,
proceed to the "Installing Optional Model Specic
Spacers" on page 8.
If not, Proceed to “Installing the Mounting Bracket”
on page 9.