Specifications

IPM-700 Series
Page 9 Visit the Premier Mounts website at http://www.premiermounts.com Installation Instructions
If you will be routing the audio, video, and/or data
connections through the wall, remove the 1½˝ knockout.
The 1½˝ knockout is easily removed by pressing hard
with your thumbs on either side of the knockout, then
twisting the knockout until it comes free.
Watch for sharp edges.
Step 4
1½˝ Knockouts for
Audio / Video / Data
Connections
Installing to a Wall (cont’d)
Insert the GB-INWAVP into the cutout.
Step 5
Use a drywall saw to remove the drywall in the area you
marked in step 2 (Figure 3).
Avoid cutting electrical wires, water pipes, or gas
lines. Remove a small piece of drywall and use a
ashlight to look around for these hazards in the
area in which you will be cutting. Once you have
located any hazards, proceed to carefully remove
the rest of the drywall.
If you do locate any hazards, their presence may require
you to relocate either the hazard or the GB-INWAVP.
Consult a qualied professional prior to relocating
electrical lines, gas lines, or water pipes.
Step 3