Specifications

GB-MS1
Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.com Page 9
PSD-S Installation

To attach the PSD-S ceiling adapter to the
suspension device (not included), rotate the ceiling
adapter clockwise onto the suspension device a
minimum of ve (5) complete turns (Figure 1).
®
Once the PSD-S has been attached, tighten the
M6 x 12mm Phillips head set screw using a Phillips
screwdriver (Figure 2).
¯
Use four (4) M10 x 12mm hex head bolts, eight
(8) M10 at washers, and four (4) M10 nuts (not
supplied) to attach the back plate to the ceiling
adapter (Figure 3).
Finger tighten all hardware.
°
Once the both units have been attached together,
use a 17mm socket wrench and a 17mm wrench
(not supplied) to tighten the M10 hardware.
Proceed to “Installing the Media Box Bracket” on
page 11.
Figure 1
Figure 2
Figure 3
(not included)
(not included)
(not included)