Specifications

GB-MS1
Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.com Page 15

Place your at panel screen-side down on a soft, at
surface.
®
Identify the number and location of the thread
inserts on the back of your at panel.
¯
Use four (4) Griplates™ and four (4) M8 nylon
nuts to attach the VESA adapter brackets to the
mounting brackets (Figure 1).
¯
Align the holes on each mounting bracket with the
thread inserts on the back of your at panel.
°
Secure each VESA adapter bracket to your at
panel by inserting a minimum of two (2) screws per
bracket.
Do not overtighten the mounting hardware. Use
washers as necessary.
Installing the Mounting Brackets (cont’d)
This section presumes that you have read and understood these sections:
● Selecting the Proper Mounting Hardware
● Universal Washer Installation
● Universal Spacer Installation
Measure the mounting points on the back of the at-panel display.
Are the mounting points at least 15.75" (400mm) apart horizontally?
• Yes - Continue to Attaching the Flat Panel to the Mounting Brackets
section below.
• No - Go to the Attaching the Flat Panel to the VESA Adapter Brackets
section below.
Attaching the Flat Panel
Proceed to “Mounting the Flat Panel” on page 16.

Place your at panel screen-side down on a soft, at
surface.
®
Identify the number and location of the thread
inserts on the back of your at panel.
¯
Align the holes on each mounting bracket with the
thread inserts on the back of your at panel.
°
Secure each mounting bracket to your at panel by
inserting a minimum of two (2) screws and two (2)
Griplates™ per bracket.
Do not overtighten the mounting hardware. Use
washers as necessary.
Attaching the Flat Panel to the Mounting Brackets
Proceed to “Mounting the Flat Panel” on page 16.
Attaching the Flat Panel to the VESA Adapter Brackets
Figure 1
Figure 2