Specifications

GB-MS1
Page 10 Visit the Premier Mounts website at http://www.premiermounts.com Installation Instructions
Dual-Pole Cart/Stand Adapter Installation
Use the Premier Mounts PSD-SPA (single-display)
adapter to mount the GB-MS1 to a dual-pole cart/stand.
You may also use other Premier Mounts adapters
with 4½" bolt patterns, such as the PSD-DPB (back-
to-back display) adapter. Please see
www.mounts.com for more information.

Use four (4) M10 x 12mm hex head bolts to attach
the PSD-SPA to the back of the GB-MS1 back plate
(Figure 1).
The hex head bolts are supplied with the PSD-
SPA.
®
Assemble the dual-pole base/stand and support
poles.
¯
Slide the PSD-SPA over and down the support poles.
Make sure the front of the PSD-SPA is facing forward.
°
Determine the viewing height of the at panel.
±
Insert four (4) M8 x 10mm set screws into the back of
the PSD-SPA (Figure 2).
Tighten the set screws using a 5/32 Allen
wrench (supplied with the PSD-SPA).
Proceed to “Installing the Media Box Bracket” on
page 11.
PSD-SPA
adapter (not
included)
GB-MS1 Back Plate
Figure 1
Figure 2
GB-MS1 not
shown.