INSTALLATION INSTRUCTIONS FM3 61”+ Universal Flat Panel Mount NORTH AMERICA EUROPE 3130 East Miraloma Avenue Swallow House, Anaheim, CA 92806 USA Shilton Industrial Estate, USA and Canada – Shilton, Coventry, England CV79JY Phone: 800-368-9700 Phone: +44 (0) 2476 614700 Fax: 800-832-4888 Fax: +44 (0) 2476 614710 Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044 ©Premier Mounts 2008 9531-035-001-01 AUSTRALIA, NEW ZEALAND, OCEANIA (DISTRIBUTOR) P.O.
FM3 Table of Contents Warning Statements ...........................................................................................................................................- 2 Parts List ............................................................................................................................................................- 3 Installation Tools .........................................................................................................................................
FM3 Parts List This wall mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700).
FM3 M4 x 16 M4 x 25 M5 x 12 M5 x 16 M5 x 20 M5 x 25 (Qty 6) M8 x 20 (Qty 6) (Qty 6) M8 x 25 (Qty 6) M8 x 30 (Qty 6) (Qty 6) M8 x 35 (Qty 6) (Qty 6) (Qty 6) (Qty 6) M8 x 45 (Qty 6) M5 x 50 (Qty 6) M6 x 16 (Qty 6) M6 x 20 (Qty 6) M6 x 30 M6 x 45 Page - 4 - M10 x 30 (Qty 6) (Qty 6) (Qty 6) Installation Manual
FM3 Nylon spacers and flat washers The nylon spacers may be stacked to achieve proper spacing.
FM3 Wall Plate Installation It is recommended that two people perform the installation. One person should hold the mount while the other person installs the lag bolt and washer. Making sure that the mount is level, the person not holding the mount must mark and drill the second mounting hole and secure the second lag bolt and washer. If the studs are 12” apart, use three 3” lag bolts for the top row of mounting points and three 3” lag bolts for the lower row mounting points.
FM3 Thread Depth Indicator 1. 2. 3. 4. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel to make sure the inserts measure the same full depth and mark it. Locate the correct diameter screw for the thread insert. Compare your marking to the screws (supplied). If your selected screw is longer than the marking on the thread depth indicator, DO NOT USE this screw. The screw length must not bypass the marking.
FM3 Mounting Bracket Installation To ensure optimal installation, this kit includes various screws of different diameters and lengths. Step 1. Place your flat panel screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the display. The number of mounting points will vary between manufacturers. Step 2.
FM3 FM3 Installation Two people are required for this step. MAKE SURE THE LOCKING SECURITY BRACKET SCREW IS FLUSH WITH THE SECURITY SCREW TAB BEFORE INSTALLATION (STEP 2). Step 1. To complete the installation of your new display mount, carefully place the flat panel brackets over the upper and lower mounting lips. Step 2. Use a Phillips head screwdriver to tighten the two (2) security bracket screws (see inset below).
FM3 Technical Specifications All measurements are in inches/mm.
FM3 Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective.
