Specifications

AM225
Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.com Page 9
Insert a concrete wedge anchor into each hole.
If necessary, lightly tap each concrete wedge anchor
into place with a hammer.
Remove the nuts and washers from all four (4)
concrete wedge anchors.
Step 3
Place the wall frame against the wall over the
threaded shafts of the concrete wedge anchors.
Replace the washers which you removed from
the concrete wedge anchors with the
5
/16˝ washers
shown in the parts list on Page 3.
Attach the nuts and
5
/16˝ washers to each of the
concrete wedge anchors and tighten using a socket
wrench and an M10 socket.
The wide mounting slots in the wall frame allow
lateral shift to help you precisely position the
pullout mount.
Do not overtighten the wedge anchor nuts.
Step 4
Installing the Wall Frame (cont’d)