Specifications

AM225
Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.com Page 7
Installing the Wall Frame (cont’d)
Place the wall frame against the wall and align it
with the pilot hole.
Insert one (1)
5
/16˝ x 3˝ lag bolt and one (1)
5
/16˝
washer into the upper right mounting hole and
tighten using a socket wrench and ½˝ socket.
Do not overtighten the lag bolt.
Step 4
Step 3
Step 5
Step 6
Drill a “pilot hole” in the center of the upper right mark
using a ¼˝ drill bit and power drill.
Only use a ¼˝ drill bit when drilling the pilot holes.
Level the wall frame.
Use a pencil to mark the remaining three (3)
mounting locations along the center of each wall
stud.
Two people are recommended for this step; one
person to level the wall frame and another person
to drill the pilot holes.
Drill a “pilot hole” in the center of each of the marks with
a power drill and a ¼˝ drill bit.
Only use ¼˝ drill bit when drilling the pilot holes.