Owner Manual

premierpet.com 5
5. Take the pump apart by first removing the
faceplate. You may need to use a fingernail
to pry it off.
6. Remove the teardrop shaped stator by
pulling up on the small lip. Note: The
adjustable flow control knob is located on
the stator.
7. Use a fingernail to pull out the impeller,
which is held in place magnetically.
8. Rinse all of the fountain components
(except for the adaptor plug).
9. Reassemble all of the fountain parts except
for the filter housing top. Reference the
black arrows for proper reassembly.
6
7
9
5