Specifications

VPM
Page 8 Visit the Premier Mounts website at www.mounts.com Installation Instructions
Installing the Adapter Plate (Optional)
WhatistheVESApatternonyourat-panel?
•If75 x 75mm or 200 x 200mm, proceedtothe75 x 75mm or 200 x 200mm section.
•If200 x 100mm, go to the 200 x 100mmsectiononpage9.
•If100 x 100mm, go to the “Attaching the Flat-Panel to the VPM Mount”sectiononpage10.
Theadapterplatehasa100mmx100mmVESApattern,butthatisonlyforattachingtheplatetothe
attachmentheadoftheVPM.
75 x 75mm or 200 x 200mm
AttachtheAdapterPlatetothebackoftheatpanel
usingtheappropriatemountinghardware.
IfyouareusingM4orM5screws,youmust
also use M4 or M5 washers.
Figure1showsaat-panelusingthe
200mmx200mmpattern.SeeFigure2for
the75mmx75mmpattern(markedE).
Go to the “Attaching the Flat-Panel to the VPM
Mount” section.
Mounting
Hardware
Universal
Spacer
Adapter
Plate
Flat-
Panel
Ifyouhavearecessedmountingpattern,use
theuniversalspacerstocompensateforthe
indentation.
E
EE
E
Figure 1
Figure 2
Washer
Optionalxedtiltadaptersnotshown.