Specifications

VPM
Installation Instructions Visit the Premier Mounts website at www.mounts.com Page 7
Theuniversalspacermaybestackedsix(1)high.Itwill
tM4,M5,M6andM8screwssizes.
Theuniversalspacersmustbeplacedbetweenthe
attachmenthead/adapterplateandthe
at-panel.
Theuniversalspacersmustbestackedinthedirection
shown to the right.
Proceedtothe“Installing the Adapter Plate
(Optional)” section.
Universal Spacer Installation (Optional)
Ifyourat-panelhasunevenmountingpoints,
orrecessedmountingpoints,pleaseusethe
provideduniversalspacers.
Selecting the Mounting Hardware
1) Insertasmallstrawortoothpickintothethreaded
insertsfoundonthebackoftheat-panel.
2) Useapenciltomarkthedepthofthethreadedinsert
onthesmallstrawortoothpick.
3) Markthestrawortoothpick1/8”abovethedepthof
thethreadedinsert,asshowninFigure1.
4) Insertthesmallstrawortoothpickintotheremaining
threadedinsertstocompareandverifytheirdepth
usingthestrawortoothpick’s1/8”allowancemark.
5) Locatethecorrectdiameterscrewforthethreaded
insert.
Ifthescrewyouselectedislongerthanthe1/8”
allowancemarkonthesmallstrawortoothpick,
asshowninFigure2andFigure3,donotusethis
screw.Thescrewlengthmustnotbypassthemark.
6) Testeachsizeofthescrewsprovided.
Thecorrectscrewsshouldthreadeasilyintothe
mountingpointandnotpulloutwhentensionis
applied.
Proceedtothe“Universal Spacer Installation
(Optional)” section.
Small Straw
orToothpick
Small Straw
orToothpick
SmallStraworToothpick
Markingthe1/8”
Allowance
DepthPlus1/8” Allowance
Mark
DepthPlus1/8” Allowance
Mark